ARO Espresso® Inclined Stand for Eureka Mignon | Silicone Catch Tray | Telescoping Dosing Stand | Low Retention Single Dosing Kit

Product Description

*This listing is for the inclined stand, silicone tray, and/or dosing stand. Grinder is NOT included!

Reduce retention, declutter your counter, and streamline your workflow with the ARO Espresso Inclined Stand, Silicone Catch Tray, and Telescoping Dosing Stand designed specifically for Eureka Mignon grinders. Engineered for flexibility and packed with thoughtful features, this low-retention kit integrates seamlessly into your setup, ensuring every shot starts with a precise dose and ends with minimal cleanup.

The inclined stand positions your grinder at a 15-degree forward tilt, making the chute more vertical so gravity can assist the flow of grounds and reduce retention. It’s a simple adjustment that helps coffee exit the grinder more efficiently. Around back, an integrated cord wrap lets you spool up excess power cable and keep it neatly hidden behind the grinder.

Any stray grounds are caught by the custom-fit silicone catch tray. It’s magnetically coupled to the stand, so simply lift it away for cleaning then slide it back in place and watch the magnets snap it perfectly into alignment.

If your workflow includes a dosing cup or shaker, the telescoping dosing stand is a must-have. It offers stepless height adjustment to fit any setup and includes embedded magnets that snap securely to the center of the silicone tray. A second magnet in the top of the stand holds your magnetic dosing accessory in place, centering it automatically for clean, repeatable, streamlined prep.

Don't forget to pair it with our bestselling Grinder Setting Dial and Aluminum Single Dose Hopper to complete your ultimate single dosing grinding station!

Key Features

• Reduced Grinder Retention: The 15-degree tilt angles the grinder forward, making the chute more vertical. This helps gravity do its job, reducing retention and minimizing clumping inside the chute.
• Clutter-Free Countertops: An integrated cord wrap on the back of the stand lets you coil the power cable and keep it tucked neatly behind the machine. 
• No Slipping, Twisting, or Vibrating: Four thick, high-friction silicone pads anchor the base to the counter, dampen vibration, and distribute weight for rock-solid stability. Your grinder stays exactly where you set it. No walking, no shifting, and noticeably quieter operation.
  
• Clean, Controlled Workflow: The silicone catch tray is custom-molded to fit perfectly with the inclined stand, catching stray grounds and keeping your workspace clean. It’s made from durable, high-quality silicone that resists warping, tearing, and surface wear. Easy to rinse or wipe clean, and sized to fit most popular espresso scales for a smooth, integrated workflow.
• Magnetic Coupling Throughout: Powerful neodymium magnets are embedded in every component. They auto-align and center the entire system to streamline your workflow. All magnets are reversible to match polarity with nearly any dosing accessory you already use.
• Stepless Height Adjustable Dosing Stand: Engineered for adaptability, the telescoping dosing stand collapses down to 28 mm, extends up to 64 mm, or locks securely at any point in between, giving you full control over the height to match your setup. 
  

Installation/Usage Instructions

Inclined Stand:

1. Place the inclined stand on your countertop and carefully set your grinder on top.
2. Attach the cord wrap by pressing it into the slot in the back of the inclined stand.
3. Coil any excess power cable around the cord wrap, and plug in your grinder.

Silicone Catch Tray:

1. Ensure the disc magnet embedded in the center of the tray matches the polarity of the telescoping dosing stand or other magnetic accessory (if using). If they repel, flex the silicone tray to remove the magnet, flip it over, and press it back in. 
2. Set the tray on your counter and slide it into the slot on the front of the inclined stand. The magnets will auto-align and the tray will attach to the stand. 

Telescoping Dosing Stand:

1. Adjust the height by holding the base and twist the outer telescoping sleeves counterclockwise. This loosens the internal screw mechanism and allows the stand to extend or collapse freely.
2. Determine the ideal height by positioning the stand under your grinder chute and placing your dosing cup or shaker on top. Then, rotate the sleeves until the platform sits at the height that works best for your setup. 
3. Remove the bottom cap using the included tool. Then use the same tool to rotate the center column until it tightens firmly against the top sleeve, locking the position in place. The tool can be flipped 180 degrees to engage either the inner or outer center column, depending on which section needs adjustment.
4. If you notice magnetic repelling between the stand and your tray or dosing accessory, the magnet may be installed with the wrong polarity. To fix this, insert a thin tool (like a screwdriver or chopstick) through the small hole on the opposite side of the magnet and gently push it out. Flip the magnet to reverse polarity, then reinstall it with the correct orientation.

Please send us a message if you need any assistance!

Compatibility

The Inclined Stand and Silicone Catch Tray are compatible with the Specialita, Silenzio, Design, Turbo, Manuale, Magnifico, Classico, Bravo, Filtro, Filtro Silent, Crono, Brew Pro, Casa, Facile, Notte, Perfetto, Zero, Zero Brew, Libra, Oro XL, Oro Single Dose, Oro Dolce Vita, and Oro Stark. 

They are NOT compatible with the older generation Eureka models that have the knob on the left. This includes the MCI and Instantaneo.

The Telescoping Dosing Stand is designed to be compatible with nearly any grinder model and dosing cup/shaker combo. It collapses down to a minimum height of 28 mm (1.1") and extends up to a max height of 64 mm (2.5"). We recommend measuring your setup and accessories to ensure a proper fit. Both embedded magnets are removable and reversible, allowing you to flip the polarity for full compatibility with any magnetic accessories you already use. You can order just the telescoping dosing stand here: COMING SOON!

All of our Eureka Mignon accessories are compatible with each other. Add our bestselling Grinder Setting Dial and Aluminum Single Dose Hopper to your order for the ultimate single dosing grinding station!

Please message us with your machine model if you have questions about compatibility.

What's in the Box?

Kit Option A: 

• Inclined Stand with Integrated Cord Wrap
  

Kit Option B: 

• Inclined Stand with Integrated Cord Wrap
• Silicone Catch Tray
  

Kit Option C: 

• Inclined Stand with Integrated Cord Wrap
• Silicone Catch Tray
• Telescoping Dosing Stand
  

Note: Magnets come pre-installed in the inclined stand, silicone tray, and telescoping dosing stand. 

Care and Maintenance

For daily maintenance, simply brush off any loose grounds and/or wipe clean with a cloth. The silicone tray can be lifted away from the inclined stand to dump any stray grounds into the waste bin and rinsed under the sink for a spotless grinding station. 

When it's time for a more thorough cleaning all components can be dissemble and hand washed with lukewarm water and soap. Be sure to rinse well and dry immediately. Not dishwasher safe.