{"title":"PortaStack Compatible Tools","description":"","products":[{"product_id":"aro-portastand","title":"ARO PortaStand™ | Adjustable Puck-Prep Station and Portafilter Tamping Stand","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARO PortaStand™\u003c\/strong\u003e is a thoughtfully engineered portafilter stand designed to provide a stable, adaptable platform for espresso puck preparation. It supports virtually all portafilter styles, sizes, and handle geometries while allowing fine control over both portafilter height and handle support position.\u003c\/p\u003e\n\u003cp\u003eUnlike fixed-height stands, the ARO Adjustable PortaStand is fully modular. The portafilter is supported at two independently adjustable contact points: a steel-reinforced silicone portafilter rest that supports the basket and body, and a flexible silicone handle saddle that supports the handle. Each contact point can be dialed in separately to create a perfectly level, stable setup for your specific portafilter and workflow.\u003c\/p\u003e\n\u003cp\u003eThe result is a puck prep stand that adapts to your equipment rather than forcing a one-size-fits-all configuration. Whether you are using a bottomless or spouted portafilter, straight or angled handle, the stand provides stable support for dosing, distribution, and tamping.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversally Compatible Design:\u003c\/strong\u003e Engineered to support bottomless, single-spouted, and double-spouted portafilters, as well as straight and angled handles across a wide range of brands and sizes. Compatibility is achieved through a contoured top interface, chamfered spout opening, flexible handle saddle, and height adjustment.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"89\" data-end=\"134\"\u003eIndependent, Precision Height Adjustment:\u003c\/strong\u003e The portafilter rest height adjusts in 3 mm increments using a dedicated spacer, while the handle support height adjusts in 6 mm increments via five magnetic silicone spacers. Both contact points are adjusted independently, allowing precise leveling to suit different portafilters, tools, tamping styles, and user preferences.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel-Reinforced Silicone Portafilter Rest:\u003c\/strong\u003e Durable silicone overmolded around a rigid steel core provides a stable, non-slip platform for distribution and tamping. The silicone contact surface protects the portafilter from scratches while resisting flex under repeated tamping forces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Aluminum Pedestal:\u003c\/strong\u003e Machined from aerospace-grade aluminum and anodized black for a durable, scratch-resistant finish. The pedestal provides rigid structural support and precise alignment between components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel-Reinforced Silicone Baseplate:\u003c\/strong\u003e Silicone overmolded around a thick steel plate adds significant weight and stability. The polished silicone underside provides a non-slip base that stays firmly in place during use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContoured Top Interface:\u003c\/strong\u003e An outer centering lip stabilizes the portafilter body, while a large chamfered center opening accommodates single- and double-spouted portafilters. A flat outer surface supports bottomless portafilters with equal stability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"instructions\"\u003eUsage Instructions\u003c\/h2\u003e\n\u003cp\u003eThe ARO PortaStand ships fully assembled with the 3 mm riser pre-installed beneath the aluminum pedestal. No assembly is required. Simply place the stand on your counter and dial in the fit for your portafilter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInitial Setup:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePlace the stand on a flat countertop. The polished silicone base will prevent slipping during use.\u003c\/li\u003e\n\u003cli\u003eInsert your portafilter into the stand so the basket rests on the portafilter rest and the handle sits in the silicone saddle.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHandle Height and Reach Adjustment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAdd or remove magnetic silicone spacers on the steel base to set the handle support height. Each spacer adds 6 mm.\u003c\/li\u003e\n\u003cli\u003eSlide the spacer stack forward or backward to fine-tune handle reach and balance.\u003c\/li\u003e\n\u003cli\u003eRotate the silicone handle saddle 180\u003cspan\u003e° \u003c\/span\u003eif needed to better support angled handles.\u003c\/li\u003e\n\u003cli\u003eAdjust until the portafilter is level, stable, and fully supported at both contact points.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFine Height Adjustment (Portafilter Rest):\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eIf finer adjustment is needed, remove the aluminum pedestal from the silicone baseplate.\u003c\/li\u003e\n\u003cli\u003eAdd or remove the 3 mm riser beneath the pedestal to adjust the portafilter rest height. \u003cem\u003eNote: The 3 mm riser is installed by default.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003ePress the aluminum pedestal firmly back into the silicone baseplate. Some force is required to fully seat it.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eYou’re now set up to perform puck prep on a stable, hands-free platform.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp data-end=\"583\" data-start=\"167\"\u003eThe \u003cstrong\u003eARO PortaStand\u003c\/strong\u003e is designed to be compatible with nearly all espresso portafilters, including bottomless, single-spouted, and double-spouted configurations. It supports straight and angled handles across a wide range of brands and sizes. The design has been validated through testing with over \u003cstrong\u003e100 different portafilters\u003c\/strong\u003e to ensure broad, real-world compatibility.\u003c\/p\u003e\n\u003cp data-end=\"705\" data-start=\"588\"\u003eIf you have an unusually shaped portafilter or are unsure about compatibility, contact us and we’ll help confirm fit.\u003c\/p\u003e\n\u003ch2\u003eWhat’s in the Box?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSteel-reinforced silicone baseplate\u003c\/li\u003e\n\u003cli\u003eAluminum riser\u003c\/li\u003e\n\u003cli\u003eSteel-reinforced silicone portafilter rest\u003c\/li\u003e\n\u003cli\u003ePrecision 3mm spacer (installed by default)\u003c\/li\u003e\n\u003cli\u003eSilicone handle saddle with embedded magnets\u003c\/li\u003e\n\u003cli\u003eFive magnetic silicone spacers (6mm thick)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCare and Maintenance\u003c\/h2\u003e\n\u003cp\u003eBrush off loose grounds after use or wipe clean with a dry or slightly damp cloth. All components can be disassembled hand washed with mild soap and lukewarm water. Rinse thoroughly and dry before reassembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot dishwasher safe.\u003c\/strong\u003e\u003c\/p\u003e","brand":"ARO Espresso","offers":[{"title":"Default Title","offer_id":54649972162851,"sku":"CFE-PPS-BLK","price":64.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3922\/7171\/files\/AROPuckPrepStand_AngledBackView_2.jpg?v=1768193038"},{"product_id":"aro-portafunnel-portastack-edition","title":"ARO PortaFunnel™ – PortaStack Edition | Magnetic Docking Dosing Funnel","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARO PortaFunnel™ – PortaStack Edition\u003c\/strong\u003e is a premium magnetic dosing funnel engineered to serve as the foundation of the ARO PortaStack system. It allows compatible puck-prep tools to dock magnetically on top of the funnel, making puck prep cleaner, more consistent, and more efficient. The funnel delivers an exceptionally strong magnetic hold to the portafilter basket while providing a dedicated docking interface for our other PortaStack tools. Each tool can be used independently, but when combined, they form a clean, integrated workflow built around the PortaFunnel.\u003c\/p\u003e\n\u003cp\u003eOur most secure magnetic funnel yet, the PortaFunnel uses custom arc magnets integrated into the base and retained by a durable silicone band to create a firm, evenly distributed hold on compatible magnetic baskets. The result is stable, hands-free dosing and puck prep with no spilled grounds.\u003c\/p\u003e\n\u003cp\u003eThe polished anodized interior minimizes retention and wipes clean easily, while the contoured profile directs grounds straight into the basket with no spillover. The satin anodized exterior resists fingerprints, improves scratch resistance, and maintains a clean, professional appearance.\u003c\/p\u003e\n\u003cp\u003eTo support the PortaStack workflow, the funnel incorporates an embedded steel docking ring in the upper lip. This ring provides a magnetic target for compatible PortaStack tools, enabling precise alignment, secure attachment, and controlled one-handed operation. The PortaFunnel also functions as a standalone dosing funnel when used outside the PortaStack system.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Arc Magnets for Secure Basket Hold:\u003c\/strong\u003e The base of the funnel incorporates six custom arc magnets, retained by a durable silicone band and shaped to match the circular profile of the portafilter basket, maximizing contact area and evenly distributing magnetic force for a secure, stable hold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Steel Docking Ring for PortaStack Tools:\u003c\/strong\u003e A steel docking ring is embedded in the funnel lip and secured by a silicone band to provide a magnetic target for compatible PortaStack tools, enabling precise alignment and secure attachment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlared Lip for Grip and Control:\u003c\/strong\u003e The lip gently flares outward with a smooth curve to provide excellent grip, control, and comfortable handling during dosing and tool docking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimally Contoured Funnel:\u003c\/strong\u003e The interior is intentionally sloped at high angle and contoured to help ensure grounds funnel cleanly into the basket, reducing mess and minimizing retention.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Surface Finishes:\u003c\/strong\u003e A polished interior minimizes retention, and wipes clean easily to remove coffee oils and fine powder, while the satin exterior resists fingerprints, and maintains a clean, professional look on your espresso bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Anodized Aluminum Construction:\u003c\/strong\u003e Crafted from precision machined aluminum with an anodized finish for a durable, scratch-resistant surface. Like all ARO tools, it’s built for long-term use and premium feel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"instructions\"\u003eUsage Instructions\u003c\/h2\u003e\n\u003cp\u003eThe ARO PortaFunnel is designed to function as part of the PortaStack system or as a standalone dosing funnel. The steps below outline the recommended workflow.\u003c\/p\u003e\n\u003col class=\"usage-steps\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttach to Basket: \u003c\/strong\u003ePlace the funnel onto the portafilter basket. The magnets in the base will self-align on compatible magnetic baskets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDose: \u003c\/strong\u003eDock the ARO Shaker and dose grounds directly into the funnel, or use a dosing cup or grind directly into the funnel. The interior geometry directs grounds into the basket and keeps the rim clear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistribute: \u003c\/strong\u003eDock the ARO Orbit PRO distribution tool onto the funnel and spin to distribute, use a manual WDT tool, or proceed without distribution if desired.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTamp: \u003c\/strong\u003eDock the ARO Tamper configured with the PortaStack-compatible sleeve and compact the grounds. Rotate slightly to polish the puck.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetach from Basket: \u003c\/strong\u003eTo remove the funnel, tilt it from one side rather than pulling straight up. This breaks the magnetic seal and allows easy release.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ARO PortaFunnel – PortaStack Edition is designed for a snug, secure fit on most 58mm and 54mm Breville\/Sage portafilters. For best performance, it is intended for use with portafilter baskets that attract magnets. While the funnel is engineered to work even with weaker magnetic baskets, some baskets do not attract magnets at all. Please confirm that your basket has at least a small amount of magnetic pull before use.\u003c\/p\u003e\n\u003cp\u003eThe 54mm PortaFunnel is designed specifically for 54mm Breville\/Sage baskets. If you plan to use it with a different portafilter or basket, measure your basket and compare it to the sizing table below to confirm compatibility.\u003c\/p\u003e\n\u003cp\u003ePlease note: the 54mm PortaFunnel is not hands-free compatible with the built-in grinder cradles on the Breville\/Sage Barista Express, Barista Pro, Barista Touch, or with the Breville\/Sage Smart Grinder Pro. For best results, use a portafilter stand, a separate grinder, or hold the portafilter under the grinder chute during dosing.\u003c\/p\u003e\n\u003cp\u003eIf you have questions about compatibility, please message us before ordering.\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 16px 0; font-size: 14px;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 10px 12px; text-align: left; background: #f6f6f6;\"\u003eSize\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 10px 12px; text-align: left; background: #f6f6f6;\"\u003eTotal Height\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 10px 12px; text-align: left; background: #f6f6f6;\"\u003eHeight Above Top Lip of Basket**\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 10px 12px; text-align: left; background: #f6f6f6;\"\u003eMax Basket Outer Diameter*\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px 12px;\"\u003e58mm\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px 12px;\"\u003e18mm\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px 12px;\"\u003e15mm\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px 12px;\"\u003e70.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #fafafa;\"\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px 12px;\"\u003e54mm\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px 12px;\"\u003e18 mm\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px 12px;\"\u003e15mm\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 10px 12px;\"\u003e63.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e* To ensure compatibility, the outer diameter of the basket lip must be less than the maximum basket outer diameter shown in the table above.\u003c\/p\u003e\n\u003cp\u003e** The funnel sits over the basket lip and extends 15 mm above the top of the basket. This dimension is useful when checking grinder clearance if you dose directly into the portafilter.\u003c\/p\u003e\n\u003ch2\u003eWhat’s in the Box?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eARO PortaFunnel\u003cstrong\u003e™\u003c\/strong\u003e – PortaStack Edition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCare and Maintenance\u003c\/h2\u003e\n\u003cp\u003eBrush off loose grounds after use or wipe clean with a dry or slightly damp cloth. The polished interior is designed to wipe clean easily. Hand wash with mild soap and lukewarm water if needed. Rinse thoroughly and dry completely before use. \u003cstrong\u003eNot dishwasher safe.\u003c\/strong\u003e\u003c\/p\u003e","brand":"ARO Espresso","offers":[{"title":"58mm \/ Black","offer_id":54736510976291,"sku":"CFE-PORSTK-FNL-58-BLK","price":34.0,"currency_code":"USD","in_stock":true},{"title":"58mm \/ Silver","offer_id":54736511009059,"sku":"CFE-PORSTK-FNL-58-SLV","price":34.0,"currency_code":"USD","in_stock":true},{"title":"54mm \/ Black","offer_id":54736511041827,"sku":"CFE-PORSTK-FNL-54-BLK","price":34.0,"currency_code":"USD","in_stock":true},{"title":"54mm \/ Silver","offer_id":54736511074595,"sku":"CFE-PORSTK-FNL-54-SLV","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3922\/7171\/files\/ARO_PortaStack_PortaFunnel_Only_Magnets_Bands_and_Steel_Ring_Collapsed.jpg?v=1771569051"},{"product_id":"aro-shaker","title":"ARO Shaker™ | Magnetic Espresso Grounds Agitator \u0026 Distributor","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARO Shaker™\u003c\/strong\u003e is a precision-engineered espresso grounds agitator that breaks up clumps formed during grinding, helping fine and coarse particles mix evenly to support consistent water flow through the puck. \u003c\/p\u003e\n\u003cp\u003eCoffee grounds do not exit the grinder uniformly. Static, burr geometry, and grind path create clumps and density variations that carry directly into the basket. Adding a simple shaking step before dosing into the basket helps separate and aerate the grounds, creating a more consistent starting point for distribution and tamping. This reduces the amount of correction needed later in the workflow and makes puck preparation more forgiving and repeatable.\u003c\/p\u003e\n\u003cp\u003eBuilt as part of the ARO PortaStack system, the Shaker docks securely to the \u003cstrong\u003eARO PortaFunnel™ – PortaStack Edition\u003c\/strong\u003e for a controlled, spill-resistant workflow, while also functioning directly on a portafilter basket. Unlike generic shakers that sit too close to the basket and create mess, the ARO Shaker is designed with an elevated drop height. When stacked on the PortaFunnel, it positions the grounds approximately 16mm above the top of the basket, allowing grounds to fall and redistribute more evenly while eliminating spills.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortaStack-Compatible Magnetic Docking System:\u003c\/strong\u003e The base of the shaker incorporates six custom arc magnets that align and attach to the steel docking ring in the ARO PortaFunnel – PortaStack Edition. The connection is secure and stable, enabling controlled one-handed operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetically Secured Cap:\u003c\/strong\u003e The cap magnetically interfaces with the shaker body using the same arc magnet and steel target architecture as the PortaStack docking system. This magnetic connection helps keep the shaker spill-resistant during handling and workflow transitions. \u003cem\u003eHold the cap in place during shaking!\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable-Polarity Magnetic Plug:\u003c\/strong\u003e The plug unscrews into two halves to access a spring-retained magnet that can be flipped to change magnetic polarity. This allows compatibility with existing shaker landing zones, such as grinders or dosing stands with magnetic targets. The magnet can also be removed entirely when no magnetic attraction is desired.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntentional Magnetic Hierarchy:\u003c\/strong\u003e The magnetic strength between the shaker body and funnel is stronger than the cap-to-body connection. When removing the lid and plug, the shaker body remains securely attached to the funnel for an efficient workflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevated Drop Height for Even Distribution:\u003c\/strong\u003e When stacked on the PortaFunnel, the shaker sits approximately 16 mm above the top of the basket. This added drop height allows grounds to flow more freely as they enter the basket, promoting a more even distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Use Base Design:\u003c\/strong\u003e The contoured base includes a seating lip that allows the shaker to rest directly on a portafilter basket without a PortaFunnel, enabling use as a standalone shaker or within any preferred workflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Aluminum Construction:\u003c\/strong\u003e Crafted from precision-machined aluminum, all components are anodized for a durable, scratch-resistant finish. A satin exterior helps hide fingerprints and smudges, while polished interior surfaces and the polished plug reduce grounds sticking and simplify cleaning. Like all ARO tools, it’s built for long-term use and premium feel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"instructions\"\u003eUsage Instructions\u003c\/h2\u003e\n\u003cp\u003eThe ARO Shaker is designed to work as part of the PortaStack system or as a standalone tool on a portafilter basket. Follow the steps below for a controlled, spill-resistant workflow.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDose:\u003c\/strong\u003e Remove the cap and leave the plug in place. Grind directly into the shaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake:\u003c\/strong\u003e Replace the cap. Hold the shaker body with one hand and use one or two fingers to hold the cap in place. Shake vigorously for 4–8 seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDock:\u003c\/strong\u003e Set the shaker onto the ARO PortaFunnel – PortaStack Edition, or place it directly on top of your portafilter basket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelease Grounds:\u003c\/strong\u003e Remove the cap, lift the plug to drop the grounds, then rotate the plug handle and gently knock the bell-shaped bottom against the interior walls of the shaker to fling remaining grounds off the plug and into the basket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetach and Proceed:\u003c\/strong\u003e Replace the plug and cap, then lift the shaker off the funnel or basket to continue with distribution or tamping.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARO Shaker\u003c\/strong\u003e is available in \u003cstrong\u003e58mm and 54mm sizes\u003c\/strong\u003e to support a wide range of portafilter basket standards.\u003c\/p\u003e\n\u003cp\u003eThe ideal use case is pairing the shaker with the \u003ca href=\"https:\/\/aroespresso.com\/products\/portafunnel-portastack-edition\" title=\"ARO® PortaFunnel – PortaStack Edition | Magnetic Docking Dosing Funnel\" target=\"_blank\"\u003e \u003cstrong\u003eARO PortaFunnel – PortaStack Edition\u003c\/strong\u003e \u003c\/a\u003e, which provides optimal alignment drop height as part of the PortaStack workflow.\u003c\/p\u003e\n\u003cp\u003eThat said, the PortaFunnel is \u003cstrong\u003enot required\u003c\/strong\u003e. The shaker can also be used directly on a portafilter basket with no funnel, or with other funnels, depending on your workflow preference.\u003c\/p\u003e\n\u003ch2\u003eSize Guidance\u003c\/h2\u003e\n\u003cp\u003eIf you plan to use the shaker with the PortaFunnel – PortaStack Edition, choose the same size shaker and funnel. If you plan to use the shaker directly on your basket without a funnel, select the size based on your basket inner diameter or tamper diameter.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003e58mm shaker\u003c\/strong\u003e if your basket inner diameter falls between 57mm and 58.5mm, covering E61, Lelit, and other standard 58mm machines.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003e54mm shaker\u003c\/strong\u003e if your basket inner diameter or tamper size is between 53mm and 54mm. This includes systems such as Breville\/Sage, Dalla Corte, San Marco, La Spaziale, 9Barista, and similar standards.\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions about compatibility.\u003c\/p\u003e\n\u003ch3\u003eWhy Two Shaker Sizes?\u003c\/h3\u003e\n\u003cp\u003eWe designed two shaker diameters to improve alignment and usability across both larger and smaller basket standards while maintaining appropriate internal volume for common dose ranges. The 58mm shaker is slightly wider and shorter at 76mm diameter and 78mm tall, while the 54mm shaker is slightly narrower and taller at 70mm diameter and 86mm tall. This dimensional tuning keeps capacity and performance consistent across both sizes without compromising fit or workflow.\u003c\/p\u003e\n\u003ch2\u003eWhat’s in the Box?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eARO Shaker body\u003c\/li\u003e\n\u003cli\u003eMagnetic cap\u003c\/li\u003e\n\u003cli\u003eTwo-piece magnetic plug with adjustable-polarity magnet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCare and Maintenance\u003c\/h2\u003e\n\u003cp\u003eBrush off loose grounds after use or wipe clean with a dry or slightly damp cloth. The plug can be disassembled for cleaning. Hand wash components with mild soap and lukewarm water if needed. Rinse thoroughly and dry completely before reassembly. \u003cstrong\u003eNot dishwasher safe.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eOther Useful Info\u003c\/h2\u003e\n\u003cp\u003eThe 58mm ARO Shaker measures 76mm in diameter and 78mm tall with the cap installed, or 69mm tall without the cap.\u003c\/p\u003e\n\u003cp\u003eThe 54mm ARO Shaker™ measures 70mm in diameter and 86mm tall with the cap installed, or 78mm tall without the cap.\u003c\/p\u003e","brand":"ARO Espresso","offers":[{"title":"58mm \/ Black","offer_id":54736511107363,"sku":"CFE-PORSTK-SHK-58-BLK","price":72.0,"currency_code":"USD","in_stock":true},{"title":"58mm \/ Silver","offer_id":54736511140131,"sku":"CFE-PORSTK-SHK-58-SLV","price":72.0,"currency_code":"USD","in_stock":true},{"title":"54mm \/ Black","offer_id":54736511172899,"sku":"CFE-PORSTK-SHK-54-BLK","price":72.0,"currency_code":"USD","in_stock":true},{"title":"54mm \/ Silver","offer_id":54736511205667,"sku":"CFE-PORSTK-SHK-54-SLV","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3922\/7171\/files\/AROPortaStack_Shaker_FrontView_Hero_Black.jpg?v=1771569370"},{"product_id":"aro-orbit-pro-portastack-edition","title":"ARO Orbit PRO™ – PortaStack Edition | Aluminum Spirographic Espresso Distribution Tool","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eWatch the set-up and use video \u003cstrong\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=caBRmn16PcU\" title=\"ARO Orbit Setting Up and Using Your Spirographic Espresso Distribution Tool\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e. Note: The video features our original ARO Orbit™, but the set-up is the same for the new Orbit PRO - PortaStack Edition.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eOrbit PRO™ – PortaStack Edition\u003c\/strong\u003e is the next evolution of ARO's best-selling Orbit PRO™, designed to seamlessly integrate into the ARO PortaStack puck prep system. This version docks magnetically to the \u003cstrong\u003eARO PortaFunnel™ – PortaStack Edition\u003c\/strong\u003e, locking the tool into a centered, repeatable position before distribution begins.\u003c\/p\u003e\n\u003cp\u003eWe integrated the Orbit PRO™ into the PortaStack workflow to address the two most common pieces of feedback we received on the original Orbit PRO™:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuided pin entry during placement:\u003c\/strong\u003e The large PortaFunnel opening creates an easy, forgiving target that ensures all pins enter the basket cleanly, significantly reducing the risk of pins catching on the rim and bending during placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContained, spill-free distribution during removal:\u003c\/strong\u003e Stacking onto the PortaFunnel keeps grounds fluffed above the basket contained, eliminating spillover when the tool is removed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe \u003cstrong\u003eOrbit PRO – PortaStack Edition\u003c\/strong\u003e is a professional-grade spirographic espresso distribution tool engineered as a dedicated component of the PortaStack workflow. Crafted from durable aluminum and featuring precision ball bearings, it is designed for both dedicated home baristas and professional cafés that value repeatability and control. Every aspect of the tool has been optimized, from meticulously engineered gear ratios and pin paths to an ultra-smooth mechanism that spins effortlessly with the touch of a finger.\u003c\/p\u003e\n\u003cp\u003eAt the core of the Orbit PRO™ is spirographic motion. Hypotrochoids and epitrochoids are curves formed by tracing a point attached to a rolling circle as it moves along the inside or outside of a fixed circle. This mechanical geometry is used to sweep, mix, and redistribute coffee grounds throughout the basket, breaking up clumps and evening density across the puck. The result is a more consistent, repeatable extraction from shot to shot.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eIf you are looking for the \u003cstrong\u003estandalone ARO Orbit PRO™\u003c\/strong\u003e designed to be used directly on your portafilter basket without a PortaFunnel, it is available as an independent tool and can be purchased \u003ca href=\"https:\/\/aroespresso.com\/products\/aro-orbit-pro-aluminum-spirographic-espresso-distribution-tool\" title=\"ARO Orbit PRO™ | Aluminum Spirographic Espresso Distribution Tool\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eIf you already own a standalone Orbit PRO™ and would like to integrate it into the PortaStack workflow, a dedicated \u003cstrong\u003eOrbit PRO™ PortaStack Upgrade Kit\u003c\/strong\u003e is available to add docking compatibility. It can be purchased \u003ca href=\"https:\/\/aroespresso.com\/products\/orbit-pro-portastack-upgrade-kit\" title=\"ARO Orbit PRO™ PortaStack Upgrade Kit\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortaStack-Compatible Magnetic Docking System:\u003c\/strong\u003e The base of the docking sleeve incorporates six custom arc magnets that align and attach to the steel docking ring in the ARO PortaFunnel – PortaStack Edition. The connection is secure and stable, enabling controlled one-handed operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuided Pin Entry During Placement:\u003c\/strong\u003e The large PortaFunnel opening creates a forgiving target that ensures all pins enter the basket cleanly, reducing the risk of pins catching on the rim and bending during placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContained, Spill-Free Distribution:\u003c\/strong\u003e Using the PortaFunnel keeps grounds fluffed above the basket contained, eliminating spillover when the tool is removed and keeping the handoff to tamping clean and controlled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast, Repeatable Distribution:\u003c\/strong\u003e Spirographic mechanical motion fluffs and redistributes grounds in seconds, producing a uniform, level bed in 4 spins. Well suited for both home workflows and commercial environments where consistency matters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Ball Bearings:\u003c\/strong\u003e Each gear is equipped with maintenance-free, sealed ball bearings for an ultra-smooth mechanism that effortlessly rotates with the touch of a finger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNovel and Innovative Gear Design:\u003c\/strong\u003e Three gears work in harmony for optimal mixing, distribution, and fluffing in as few as four spins.\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe Sweeper:\u003c\/strong\u003e An extended-arm gear that whips the pins through clumps at high velocity to break up compacted grounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe Scrambler:\u003c\/strong\u003e A short-arm gear that moves the pins laterally across the basket, mixing and redistributing grounds to equalize density and promote a level bed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe Edge Dancer:\u003c\/strong\u003e A compact gear that pushes and pulls grounds near the basket edge to ensure complete coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Pins with Spares Included:\u003c\/strong\u003e Uses 10 pins to trace dozens of hypotrochoid and epitrochoid paths. Twenty pins are included with every order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Pin Depth:\u003c\/strong\u003e Pin height is adjustable to accommodate a wide range of basket depths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Aluminum Construction:\u003c\/strong\u003e Built to endure demanding environments, the aluminum housing provides a sleek, professional appearance while ensuring strength and longevity. Finished with a premium, scratch-resistant satin anodize that resists wear and corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSelecting the Ideal Gear Material for Your Workflow\u003c\/h2\u003e\n\u003cp\u003eWe are excited to offer the ARO Orbit PRO™ - PortaStack Edition with four unique gear options: plastic, silicone, aluminum, and brass. Choose the combination of look, feel, and value that best fits your workflow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic Gears:\u003c\/strong\u003e Our most affordable option. Lightweight, smooth, and quiet in operation. Made from additively manufactured PLA plastic with embedded stainless steel ball bearings. Choose plastic if you want the best value and do not mind minor layer lines from the manufacturing process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSilicone Gears:\u003c\/strong\u003e A worthy upgrade over plastic. Silicone offers quiet and smooth rotation, absorbing vibrations for a softer feel. Molded from durable, food-grade silicone with embedded stainless steel ball bearings, these gears feature a subtle matte finish that blends with the body of the tool. Choose silicone if you want a more premium feel than plastic without stepping up to the cost of metal gears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum Gears:\u003c\/strong\u003e Our flagship and most balanced option. Precision-machined from solid aluminum and anodized to match the Orbit finish, these gears look like they belong. Featuring press-fit stainless steel ball bearings, they deliver a crisp, mechanical feel with smooth, lightweight motion that feels refined and responsive. Choose aluminum if you want a blend of durability, aesthetics, and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrass Gears (plus matching Brass Lock Ring):\u003c\/strong\u003e Our heaviest and most premium option. Machined from solid Eco-Brass, a high-quality, 100% lead-free alloy selected for improved durability and tarnish resistance. Featuring press-fit stainless steel ball bearings, these gears deliver smooth, weighted rotation with a satisfying sense of control. The warm, brushed metallic finish adds a refined, high-end look that pairs with either black or silver Orbit bodies. Choose brass if you want the most substantial feel and a touch of luxury in every rotation. \u003cem\u003eThis version includes a matching brass lock ring for an added premium touch.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ePlease message us if you have any questions about what gear material to choose.\u003c\/p\u003e\n\u003ch2\u003eSet-Up Instructions\u003c\/h2\u003e\n\u003cp\u003eThe Orbit PRO™ – PortaStack Edition requires the use of the ARO PortaFunnel – PortaStack Edition. Follow the steps below to configure the tool before first use.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Pins:\u003c\/strong\u003e Install 10 pins by inserting them into the holes in the gears. If a pin hole is difficult to reach, rotate the tool so the gears move into a new position. The sleeve can also be removed temporarily for easier access. Take your time. The pins have flat tips, but they are still sharp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Pin Depth:\u003c\/strong\u003e With an empty portafilter basket, attach the ARO PortaFunnel – PortaStack Edition. Dock the Orbit PRO™ onto the funnel and inspect pin depth under bright light. If adjustment is needed, hold the jam nut and rotate the sleeve until the desired height is reached. Tighten the jam nut against the sleeve to lock in the pin depth.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 id=\"instructions\"\u003eUsage Instructions\u003c\/h2\u003e\n\u003cp\u003eThe Orbit PRO™ – PortaStack Edition is designed to work as part of the PortaStack workflow for clean, consistent distribution.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDose:\u003c\/strong\u003e With the PortaFunnel attached to the basket, dose coffee into the portafilter using your preferred method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDock:\u003c\/strong\u003e Set the Orbit PRO™ onto the PortaFunnel, allowing it to magnetically dock and self-center.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistribute:\u003c\/strong\u003e Spin the tool 4 to 8 times. There is no need to overwork the grounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift and Stow:\u003c\/strong\u003e Lift the Orbit PRO™ straight up and off the PortaFunnel and place it in its stand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTamp and Brew:\u003c\/strong\u003e Tamp using your preferred tamper. We recommend the ARO Auto-Level Tamper\u003cstrong\u003e™\u003c\/strong\u003e. Proceed with extraction.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cem\u003eWatch the set-up and use video below. Note: The video features our original ARO Orbit™, but the set-up is similar for the new Orbit PRO – PortaStack Edition featured in this listing.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe title=\"ARO Orbit | Setting Up and Using Your Spirographic Espresso Distribution Tool\" src=\"https:\/\/www.youtube.com\/embed\/caBRmn16PcU\" width=\"548\" height=\"308\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eOrbit PRO – PortaStack Edition\u003c\/strong\u003e is available in 58mm and 54mm sizes and is designed to dock to the \u003cstrong\u003eARO PortaFunnel – PortaStack Edition\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePortaFunnel Requirement and Size Matching:\u003c\/strong\u003e The ARO PortaFunnel – PortaStack Edition is required for use with this version of the Orbit PRO™. The docking sleeve interfaces directly with the funnel’s embedded steel ring, and this version includes longer, stiffer pins and a taller stand to accommodate the added funnel height. \u003cem\u003eYou must select the same size Orbit PRO™ as your PortaFunnel.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eIf you do not already own a compatible PortaFunnel, you must add one to your order: \u003ca href=\"https:\/\/aroespresso.com\/products\/aro-portafunnel-portastack-edition\" title=\"ARO® PortaFunnel – PortaStack Edition | Magnetic Docking Dosing Funnel\" rel=\"noopener\" target=\"_blank\"\u003eARO PortaFunnel – PortaStack Edition\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasket Compatibility:\u003c\/strong\u003e All Orbit PRO sizes are compatible with portafilter baskets with depths ranging from \u003cstrong\u003e20–28mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe PortaStack system works best with portafilter baskets that attract magnets. Weak magnetic attraction is acceptable, but baskets with little to no magnetic attraction may require two-handed operation.\u003c\/p\u003e\n\u003cp\u003eIf you have questions about compatibility, contact us and we’ll help confirm the right configuration before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePin Compatibility:\u003c\/strong\u003e Silicone and metal gear options are fully compatible with a range of pin diameters. Silicone gears use flexible pin holes, and metal gears use silicone sleeves to retain the pins, allowing the use of larger-diameter pins if desired. Plastic gears can also accommodate pins \u003cem\u003eup to 0.35mm\u003c\/em\u003e diameter, though pliers may be required to press the pins into the plastic holes.\u003c\/p\u003e\n\u003cp\u003eThe Orbit PRO ships with 0.25mm diameter pins, which testing has shown provide the best balance of performance and durability. Larger pin diameters are available separately for users who wish to experiment, and can be purchased here: \u003ca href=\"https:\/\/aroespresso.com\/products\/spare-pins-for-espresso-distribution-tools\" title=\"Spare Pins for Espresso Distribution Tools\" rel=\"noopener\" target=\"_blank\"\u003eSpare Pins for Espresso Distribution Tools\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat’s in the Box?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eARO Orbit PRO™ gear mechanism\u003c\/li\u003e\n\u003cli\u003ePortaStack-compatible magnetic docking sleeve\u003c\/li\u003e\n\u003cli\u003eStorage stand\u003c\/li\u003e\n\u003cli\u003e20x pins (0.25mm diameter, 67mm long), including two pin storage tubes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePortaFunnel not included.\u003c\/strong\u003e Order here: \u003ca href=\"https:\/\/aroespresso.com\/products\/aro-portafunnel-portastack-edition\" title=\"ARO® PortaFunnel – PortaStack Edition | Magnetic Docking Dosing Funnel\" rel=\"noopener\" target=\"_blank\"\u003eARO PortaFunnel – PortaStack Edition\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eCare and Maintenance\u003c\/h2\u003e\n\u003cp\u003eFor daily maintenance, brush off loose grounds or wipe clean with a cloth. When you need a more thorough cleaning, remove the pins, sleeve, and lock nut from the gear mechanism. Wipe down the gear mechanism with a damp cloth while avoiding water inside the rotating parts. The pins, sleeve, lock nut, and stand may be hand washed with lukewarm water and soap. Rinse well and dry immediately. \u003cstrong\u003eNot dishwasher safe.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eOther Useful Info\u003c\/h2\u003e\n\u003cp\u003eThe 58mm Orbit PRO has an outside diameter of 76mm, and the 54mm version has an outside diameter of 70mm.\u003c\/p\u003e\n\u003cp\u003eThe gears can be removed using a 1.5mm hex key inserted through the center holes. Proceed with caution as reassembling requires the gears to be attached with a specific orientation. See \u003ca href=\"https:\/\/aroespresso.com\/pages\/how-to-replace-the-gears-on-the-aro-orbit-pro\" title=\"How to Replace the Gears on the ARO Orbit PRO\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e for more details.\u003c\/p\u003e\n\u003cp\u003eFor the \u003cem\u003eplastic geared\u003c\/em\u003e version only, the three small gears are additively manufactured from PLA plastic. Keep away from extreme heat. Do not store on top of your espresso machine.\u003c\/p\u003e","brand":"ARO Espresso","offers":[{"title":"58mm \/ Black \/ Plastic","offer_id":54736511238435,"sku":"CFE-PORSTK-ORBPRO-58-BLK","price":94.0,"currency_code":"USD","in_stock":true},{"title":"58mm \/ Black \/ Silicone","offer_id":54736536437027,"sku":"CFE-PORSTK-ORBPRO-58-BLK-SIL","price":100.0,"currency_code":"USD","in_stock":true},{"title":"58mm \/ Black \/ Aluminum","offer_id":54736536469795,"sku":"CFE-PORSTK-ORBPRO-58-BLK-ALU","price":125.0,"currency_code":"USD","in_stock":true},{"title":"58mm \/ Black \/ Brass","offer_id":54736536502563,"sku":"CFE-PORSTK-ORBPRO-58-BLK-BRS","price":165.0,"currency_code":"USD","in_stock":false},{"title":"58mm \/ Silver \/ Plastic","offer_id":54736511271203,"sku":"CFE-PORSTK-ORBPRO-58-SLV","price":94.0,"currency_code":"USD","in_stock":true},{"title":"58mm \/ Silver \/ Silicone","offer_id":54736536535331,"sku":"CFE-PORSTK-ORBPRO-58-SLV-SIL","price":100.0,"currency_code":"USD","in_stock":false},{"title":"58mm \/ Silver \/ Aluminum","offer_id":54736536568099,"sku":"CFE-PORSTK-ORBPRO-58-SLV-ALU","price":125.0,"currency_code":"USD","in_stock":false},{"title":"58mm \/ Silver \/ Brass","offer_id":54736536600867,"sku":"CFE-PORSTK-ORBPRO-58-SLV-BRS","price":165.0,"currency_code":"USD","in_stock":false},{"title":"54mm \/ Black \/ Plastic","offer_id":54736511303971,"sku":"CFE-PORSTK-ORBPRO-54-BLK","price":94.0,"currency_code":"USD","in_stock":true},{"title":"54mm \/ Black \/ Silicone","offer_id":54736536633635,"sku":"CFE-PORSTK-ORBPRO-54-BLK-SIL","price":100.0,"currency_code":"USD","in_stock":false},{"title":"54mm \/ Black \/ Aluminum","offer_id":54736536666403,"sku":"CFE-PORSTK-ORBPRO-54-BLK-ALU","price":125.0,"currency_code":"USD","in_stock":false},{"title":"54mm \/ Black \/ Brass","offer_id":54736536699171,"sku":"CFE-PORSTK-ORBPRO-54-BLK-BRS","price":165.0,"currency_code":"USD","in_stock":false},{"title":"54mm \/ Silver \/ Plastic","offer_id":54736511336739,"sku":"CFE-PORSTK-ORBPRO-54-SLV","price":94.0,"currency_code":"USD","in_stock":true},{"title":"54mm \/ Silver \/ Silicone","offer_id":54736536731939,"sku":"CFE-PORSTK-ORBPRO-54-SLV-SIL","price":100.0,"currency_code":"USD","in_stock":false},{"title":"54mm \/ Silver \/ Aluminum","offer_id":54736536764707,"sku":"CFE-PORSTK-ORBPRO-54-SLV-ALU","price":125.0,"currency_code":"USD","in_stock":false},{"title":"54mm \/ Silver \/ Brass","offer_id":54736536797475,"sku":"CFE-PORSTK-ORBPRO-54-SLV-BRS","price":165.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3922\/7171\/files\/AROPortaStack_OrbitPRO_BlackwBrassGears_CoverPhoto_PortaStackEditionTitle.jpg?v=1771474564"},{"product_id":"aro-manual-wdt-v2","title":"ARO® Manual WDT v2 | Magnetic Customizable Distribution Tool with Stand or Mount","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARO® Manual WDT v2\u003c\/strong\u003e is a premium, magnetically dockable distribution tool engineered for baristas who want full control over puck prep without the clutter and compromises of typical WDT tools. Built from contoured anodized aluminum with a redesigned, tool-free pin system, v2 delivers cleaner storage, easier pin changes, dual pin diameters, and a fully customizable pin pattern so you can tune feel, coverage, and workflow.\u003c\/p\u003e\n\u003cp\u003eWDT is about breaking clumps and redistributing density before tamping. The ARO Manual WDT v2 lets you choose a narrower or wider, more splayed pin layout and experiment with pin count and diameter\/stiffness to match your grinder, basket size, and preferred technique. The result is a more uniform puck that supports more consistent water flow during extraction.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgraded Storage (Stand or Mount):\u003c\/strong\u003e Choose heavy formed-steel stand or a magnetic wall mount for secure, suspended storage. The handle includes an embedded magnet so the tool docks magnetically to either option.\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel Stand Option:\u003c\/strong\u003e Thick, durable formed steel with a satin black powder coat and a thick silicone base pad for scratch protection and grip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Wall Mount Option:\u003c\/strong\u003e Durable additively manufactured plastic mount designed to be non-scratch when used on or near your machine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContoured Anodized Aluminum Handle:\u003c\/strong\u003e Ergonomic handle shape designed to match ARO's signature aesthetics while remaining easy to grip and manipulate. Features a durable, scratch-resistant anodized finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Press-In Pin Holder (No Tools Required):\u003c\/strong\u003e Pins press in and pull out by hand. Tweezers are included to assist with insertion and removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Pin Patterns (Wide or Narrow):\u003c\/strong\u003e The flexible pin holder supports both wide and narrow pin layouts using a two-ring pattern plus center hole. Choose a tighter pattern for smaller baskets or a wider splay for larger baskets, then fine-tune feel and coverage by mixing pin count and location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Pin Diameters Included (Mix and Match):\u003c\/strong\u003e Includes 10x 0.25mm pins and 10x 0.35mm pins. Mix diameters to tune stiffness and feel, or alternate pin sizes for a balance of gentle slicing and effective clump breaking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended-Length, Flared Pin Geometry:\u003c\/strong\u003e Extra-long pins with intentional outward flare reach fully into deep baskets and dosing cups to promote faster, more efficient distribution with fewer passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat-Tipped Stainless Steel Pins:\u003c\/strong\u003e Custom flat-tipped pins reduce basket scratching and snagging compared to sharp needle ends. Safer for portafilter baskets and hands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Materials and Finishes:\u003c\/strong\u003e Precision machined aluminum handle with a durable, scratch-resistant anodized satin finish, paired with high-quality powder-coated steel stand. Stainless steel pins resist corrosion, while engineered polymers are used where flexibility, durability, and non-marring contact are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"instructions\"\u003eSet-Up and Usage Instructions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eInsert Pins:\u003c\/strong\u003e It is recommended to start with 9 pins using the center hole plus either the outer ring for wider 57mm to 58mm baskets or the inner ring for narrower 49mm to 55mm baskets. From there, adjust pin count, placement, and diameter to tune feel and control. Press pins into the flexible holder by hand, or use the included tweezers for more precise insertion and removal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDistribute:\u003c\/strong\u003e After dosing, stir and distribute grounds to break up clumps and even out density across the puck. Use consistent motion and let the pins do the work. Start with deeper passes near the bottom of the basket, then finish by lightly raking only the top few millimeters to level the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage:\u003c\/strong\u003e Dock the tool magnetically under the steel stand or onto the wall mount’s magnetic target to keep pins protected and your espresso station tidy between shots.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWall Mount Installation:\u003c\/strong\u003e The magnetic wall mount ships without either pad pre-installed so you can choose the mounting method that best fits your setup.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Strength Magnet + Silicone Pad:\u003c\/strong\u003e A smooth, polished silicone pad can be applied to the back of the mount to add grip on metal surfaces. When paired with the high-strength magnet embedded in the mount, it creates a secure, non-marring storage solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-Residue Double-Stick Pad:\u003c\/strong\u003e Use the included transparent gel-style adhesive pad to mount the holder on non-magnetic surfaces. It provides a secure hold while remaining removable and leaving no residue behind.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARO Manual WDT v2\u003c\/strong\u003e can be used with any size portafilter basket. It is recommended for baristas who use a range of basket sizes and want one adjustable tool rather than multiple fixed-pattern WDT tools.\u003c\/p\u003e\n\u003ch2\u003eWhat’s in the Box?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eARO Manual WDT v2 handle with flexible press-in pin holder\u003c\/li\u003e\n\u003cli\u003e10x 0.25mm stainless steel pins (87mm long) in labeled storage tube\u003c\/li\u003e\n\u003cli\u003e10x 0.35mm stainless steel pins (87mm long) in labeled storage tube\u003c\/li\u003e\n\u003cli\u003ePin insertion tweezers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStorage option (choose one):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFormed-steel stand with satin black powder coat and silicone base pad\u003cbr\u003e\u003cstrong\u003eor\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMagnetic wall mount + silicone pad \u0026amp; double-stick pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCare and Maintenance\u003c\/h2\u003e\n\u003cp\u003eBrush off loose grounds after use or wipe clean with a dry or slightly damp cloth. When needed, pins can be removed and components hand washed with mild soap and lukewarm water. Rinse thoroughly and dry completely before reassembly or storage. \u003cstrong\u003eNot dishwasher safe.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat’s New in Manual WDT v2?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefined profile:\u003c\/strong\u003e Updated shape to match ARO’s signature aesthetics and PortaStack design philosophy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free pin system:\u003c\/strong\u003e Pins press in and pull out by hand. No tools required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual pin patterns:\u003c\/strong\u003e Wide or narrow layouts using a two-ring pattern plus center hole.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual pin diameters:\u003c\/strong\u003e Includes both 0.25mm and 0.35mm pins to tune stiffness and feel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic docking storage:\u003c\/strong\u003e Embedded handle magnet with your choice of a steel stand or wall mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgraded materials:\u003c\/strong\u003e CNC-machined aluminum handle, powder-coated steel stand, and engineered polymers for durability and non-marring contact.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ARO Espresso","offers":[{"title":"Black \/ Steel Stand","offer_id":54736511402275,"sku":"CFE-WDTV2-STD-BLK","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Magnetic Wall Mount","offer_id":54736525132067,"sku":"CFE-WDTV2-WLMT-BLK","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Steel Stand","offer_id":54736511435043,"sku":"CFE-WDTV2-STD-SLV","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Magnetic Wall Mount","offer_id":54736525164835,"sku":"CFE-WDTV2-WLMT-SLV","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3922\/7171\/files\/ManualWDTv2_Black_FrontAngled_AttachedtoStand_CoverAligned.jpg?v=1771568063"},{"product_id":"aro-auto-level-tamper","title":"ARO Auto-Level Tamper™ | Self-Leveling Single-Spring Espresso Tamper","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARO Auto-Level Tamper™\u003c\/strong\u003e is a self-leveling, single-spring espresso tamper engineered for espresso lovers who want perfectly level, evenly aligned tamp without sacrificing tactile feedback. Rather than using a calibrated multi-spring or multi-stage mechanism, the ARO Auto-Level Tamper is intentionally designed to preserve the most important part of tamping: feeling the puck compress evenly under your hand.\u003c\/p\u003e\n\u003cp\u003eIn espresso puck preparation, level matters more than force. A tilted puck can cause immediate side-channeling. Even with high pressure, water will bypass the high part of the puck. The ARO Auto-Level Tamper uses a leveling sleeve with a light, smooth spring action to keep the tamper square while still letting you apply pressure by feel. Grounds only compress so much, and consistency comes from even distribution, proper alignment, and repeatable technique.\u003c\/p\u003e\n\u003cp\u003eEvery interface is engineered for premium feel and long-term durability, including a tight-tolerance sleeve motion system built around a food-safe tribo-polymer bushing to eliminate metal-on-metal noise and wear. This tamper helps you build a structured puck while keeping the tamping experience tactile, controlled, and satisfying.\u003c\/p\u003e\n\u003cp\u003eAs part of the ARO PortaStack workflow, the Auto-Level Tamper includes a dedicated funnel-matching sleeve designed to interface with the \u003cstrong\u003eARO PortaFunnel™ – PortaStack Edition\u003c\/strong\u003e. When placed into the funnel, the sleeve self-centers and levels before the tamper foot touches the grounds, helping prevent crooked first contact on fluffy, untamped coffee.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Leveling, Single-Spring Design:\u003c\/strong\u003e The sleeve levels the tamper with a light spring action so you can tamp square without losing the sensation of the puck compressing. Designed to avoid the detached feel of dual-stage or “calibrated” tampers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortaStack-Ready Tamping Interface:\u003c\/strong\u003e Includes a funnel-matching sleeve engineered to interface with the ARO PortaFunnel – PortaStack Edition. The sleeve self-centers and levels the tamper before initial grounds contact for a more repeatable start to tamping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Sleeves Included (Funnel + Basket):\u003c\/strong\u003e Every order includes two easily interchangeable sleeves:\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlared Funnel Sleeve:\u003c\/strong\u003e Contoured to match the ARO PortaFunnel – PortaStack Edition for centered, self-leveling tamping through the funnel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat Basket Sleeve:\u003c\/strong\u003e Designed for use without a dosing funnel on a standard basket rim.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComfortable Contoured Aluminum Handle:\u003c\/strong\u003e Anodized aluminum handle is contoured for a confident grip. The diameter supports palm tamping, while the flared lip provides a natural finger rest for a traditional tamping grip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirror-Polished Stainless Steel Shaft:\u003c\/strong\u003e The handle connects to the tamper foot through a mirror-polished stainless steel shaft for a premium look and heavy-duty stiffness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Friction Sleeve Motion:\u003c\/strong\u003e The leveling sleeve rides on a tight-tolerance tribo-polymer bushing to eliminate metal-on-metal scraping noise and create a smooth, high-quality feel. The bushing material is certified food safe in both the USA and Europe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"121\" data-start=\"92\"\u003eControlled Sleeve Return:\u003c\/strong\u003e A friction gasket embedded inside the bushing provides one-way friction, allowing minimal resistance on the downstroke for smooth tamping while slowing the return on release to prevent loud clicking and springy bounce. The friction gasket can be removed by the user if preferred.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"531\" data-start=\"501\"\u003eLow-Suction Foot Geometry:\u003c\/strong\u003e The outer walls are cut back and the edge is kept sharp to help reduce vacuum when lifting the tamper, promoting a clean release and consistent puck surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong data-end=\"179\" data-start=\"144\"\u003ePremium Materials and Finishes:\u003c\/strong\u003e The tamper foot is machined from stainless steel and finished with a soft brushed surface that helps hide scratches and maintain a clean, premium appearance over long-term use. The handle and aluminum components are precision-machined and anodized for a durable, scratch-resistant finish that resists wear and preserves a refined look on the espresso bar.\n\u003cdiv class=\"flex flex-col text-sm pb-25\"\u003e\n\u003carticle data-turn=\"assistant\" data-scroll-anchor=\"true\" data-testid=\"conversation-turn-16\" data-turn-id=\"request-WEB:8eb20921-58dc-4769-aaf5-42a05723ffef-7\" dir=\"auto\" class=\"text-token-text-primary w-full focus:outline-none [--shadow-height:45px] has-data-writing-block:pointer-events-none has-data-writing-block:-mt-(--shadow-height) has-data-writing-block:pt-(--shadow-height) [\u0026amp;:has([data-writing-block])\u0026gt;*]:pointer-events-auto scroll-mt-[calc(var(--header-height)+min(200px,max(70px,20svh)))]\" tabindex=\"-1\"\u003e\n\u003cdiv class=\"text-base my-auto mx-auto pb-10 [--thread-content-margin:--spacing(4)] @w-sm\/main:[--thread-content-margin:--spacing(6)] @w-lg\/main:[--thread-content-margin:--spacing(16)] px-(--thread-content-margin)\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"instructions\"\u003eSet-Up and Usage Instructions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSleeve Swapping Instructions: \u003c\/strong\u003eTo swap sleeves, unscrew the handle\/foot assembly, slide off the sleeve, slide on the other sleeve, and reassemble. Take care when handling the tamper foot edge. It's \u003cstrong\u003ehighly recommended\u003c\/strong\u003e to hold the foot with a towel for better grip when tightening or loosening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePortaStack Workflow (With ARO PortaFunnel – PortaStack Edition):\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall the funnel-matching sleeve:\u003c\/strong\u003e Install the flared sleeve onto the shaft and reassemble the tamper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeave the funnel installed:\u003c\/strong\u003e Keep the PortaFunnel on the basket after dosing and distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet and pre-level:\u003c\/strong\u003e Place the tamper into the funnel. The sleeve self-centers and levels the tamper before the foot contacts the grounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTamp by feel:\u003c\/strong\u003e Apply pressure until the puck stops compressing, then lift straight up for a clean release.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eStandard Tamping (Without Funnel):\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall the flat sleeve:\u003c\/strong\u003e Install the flat sleeve onto the shaft and reassemble the tamper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlace and level:\u003c\/strong\u003e Set the tamper onto the basket rim and let the sleeve guide the tamper square.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTamp by feel:\u003c\/strong\u003e Apply pressure until the puck stops compressing, then lift straight up for a clean release.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFine Feel Tip:\u003c\/strong\u003e This tamper is designed so you can feel compression through the handle. Tamping is the final step in building a great puck, and this tool is built to preserve that sensation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance Tip (Sleeve Return Speed):\u003c\/strong\u003e If the sleeve starts sliding upward too quickly, the shaft may have oil or fine grounds buildup. Remove the sleeve and wipe the shaft and gasket clean to restore normal, controlled return behavior.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ARO Auto-Level Tamper is available in 58mm and 54mm sizes, and in black or silver handle finishes. Each size is engineered with a precisely matched tamper foot diameter for complete puck compaction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTamper Foot Diameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e58mm version: \u003c\/strong\u003e58.5mm dimeter tamper foot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e54mm version:\u003c\/strong\u003e 53.3mm dimeter tamper foot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e54mm Size Guidance:\u003c\/strong\u003e The 54mm Auto-Level Tamper is designed specifically for Breville\/Sage 54mm portafilters and baskets. This includes machines such as the Barista Express, Barista Pro, Barista Touch, Express Impress, Touch Impress, Bambino, Bambino Plus, Infuser and other systems using the Breville\/Sage 54mm standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e58mm Size Guidance:\u003c\/strong\u003e The 58mm Auto-Level Tamper is designed for standard 58mm baskets, covering E61 groupheads and other machines that use the common 58mm commercial standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-end=\"84\" data-start=\"59\"\u003eSleeve Compatibility:\u003c\/strong\u003e Every ARO Auto-Level Tamper includes two interchangeable sleeves. The \u003cstrong\u003eflared funnel sleeve\u003c\/strong\u003e is contoured to interface with the ARO PortaFunnel – PortaStack Edition. You must match your tamper size to the PortaFunnel size. \u003cstrong\u003eThe flat basket sleeve\u003c\/strong\u003e is designed for use directly on a standard basket rim when tamping without a dosing funnel.\u003c\/p\u003e\n\u003cp\u003eIf you have any questions about sizing or compatibility, please message us before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhat’s in the Box?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eARO Auto-Level Tamper\u003c\/li\u003e\n\u003cli\u003eFlared funnel sleeve (for use with the ARO PortaFunnel – PortaStack Edition)\u003c\/li\u003e\n\u003cli\u003eFlat basket sleeve (for use on a standard basket rim without a funnel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and Maintenance\u003c\/h3\u003e\n\u003cp\u003eBrush off loose grounds after use or wipe clean with a dry or slightly damp cloth. Sleeves can be removed for cleaning. Hand wash components with mild soap and lukewarm water if needed. Rinse thoroughly and dry completely before reassembly. \u003cbr\u003e\u003cbr\u003eIf the sleeve starts sliding upward too quickly, the shaft may have oil or fine grounds buildup. Remove the sleeve and wipe the shaft and gasket clean to restore normal, controlled return behavior.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNot dishwasher safe.\u003c\/strong\u003e\u003c\/p\u003e","brand":"ARO Espresso","offers":[{"title":"58mm \/ Black","offer_id":54736511566115,"sku":"CFE-PORSTK-TMP-58-BLK","price":68.0,"currency_code":"USD","in_stock":true},{"title":"58mm \/ Silver","offer_id":54736511598883,"sku":"CFE-PORSTK-TMP-58-SLV","price":68.0,"currency_code":"USD","in_stock":true},{"title":"54mm \/ Black","offer_id":54736511631651,"sku":"CFE-PORSTK-TMP-54-BLK","price":68.0,"currency_code":"USD","in_stock":true},{"title":"54mm \/ Silver","offer_id":54736511664419,"sku":"CFE-PORSTK-TMP-54-SLV","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3922\/7171\/files\/AROPortaStack_Tamper_Black_FrontViewwithFunnelSleeve_CoverFinal.jpg?v=1771568978"},{"product_id":"orbit-pro-portastack-upgrade-kit","title":"ARO Orbit PRO™ PortaStack Upgrade Kit","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARO Orbit PRO™ PortaStack Upgrade Kit\u003c\/strong\u003e converts an existing ARO Orbit PRO™ for compatibility with the ARO PortaStack system. This kit replaces the standard magnetic sleeve used for connection with an espresso basket with a magnetic docking sleeve, allowing the Orbit PRO™ to dock directly to the \u003cstrong\u003eARO® PortaFunnel – PortaStack Edition\u003c\/strong\u003e. It also includes extra-long pins and an extra-tall storage stand, designed to accommodate the added height introduced by the PortaFunnel.\u003c\/p\u003e\n\u003cp\u003eThis upgrade is intended for customers who already own a standalone Orbit PRO™ and want to integrate it into the PortaStack workflow without purchasing a new tool.\u003c\/p\u003e\n\u003cp\u003eFor a full explanation of the Orbit PRO™ distribution mechanism, spirographic motion, and workflow benefits, see the complete \u003ca rel=\"noopener\" href=\"https:\/\/aroespresso.com\/products\/orbit-pro-portastack-edition\" target=\"_blank\"\u003eOrbit PRO™ – PortaStack Edition listing\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdds PortaStack Compatibility:\u003c\/strong\u003e Enables the Orbit PRO™ to magnetically dock to the ARO® PortaFunnel – PortaStack Edition for centered, repeatable placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReversible Retrofit:\u003c\/strong\u003e No permanent changes to the Orbit PRO™. The PortaStack sleeve can be removed to return the tool to its original configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuided Pin Entry During Placement:\u003c\/strong\u003e The large PortaFunnel opening creates a forgiving target that ensures all pins enter the basket cleanly, reducing the risk bent pins during placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContained, Spill-Free Distribution:\u003c\/strong\u003e Using the PortaFunnel keeps grounds fluffed above the basket contained, eliminating spillover when the tool is removed to reduce mess.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Aluminum Construction:\u003c\/strong\u003e Crafted from aluminum to ensure strength and longevity. Finished with a premium, scratch-resistant satin anodize.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Orbit PRO PortaStack Upgrade Kit is compatible with existing Orbit PRO tools in the corresponding size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePortaFunnel Required:\u003c\/strong\u003e The\u003cstrong\u003e PortaFunnel – PortaStack Edition\u003c\/strong\u003e is required for proper use of the upgraded Orbit PRO. The PortaFunnel provides the correct docking interface and vertical clearance for the upgraded magnetic sleeve and longer pins. If you do not already own a compatible PortaFunnel, you must add one to your order. Learn more about the \u003ca title=\"ARO® PortaFunnel – PortaStack Edition | Magnetic Docking Dosing Funnel\" href=\"https:\/\/aroespresso.com\/products\/aro-portafunnel-portastack-edition\"\u003eARO® PortaFunnel – PortaStack Edition\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize Matching:\u003c\/strong\u003e Your \u003cstrong\u003eOrbit PRO™\u003c\/strong\u003e, \u003cstrong\u003eUpgrade Kit\u003c\/strong\u003e, and \u003cstrong\u003ePortaFunnel\u003c\/strong\u003e must all be the same size.\u003c\/p\u003e\n\u003cp\u003eIf you are unsure which components or size you need, please contact us before ordering.\u003c\/p\u003e\n\u003ch2 id=\"instructions\"\u003eSet-Up Instructions\u003c\/h2\u003e\n\u003cp\u003eFollow the steps below to convert your existing ARO Orbit PRO™ for full PortaStack™ docking compatibility.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUnscrew and remove the existing magnetic sleeve from your ARO Orbit PRO™.\u003c\/li\u003e\n\u003cli\u003eRemove the original short pins from the tool.\u003c\/li\u003e\n\u003cli\u003eInstall 10 of the longer pins included in this upgrade kit.\u003c\/li\u003e\n\u003cli\u003eScrew on the PortaStack-compatible magnetic docking sleeve included in the kit.\u003c\/li\u003e\n\u003cli\u003eStore the upgraded tool in the extra-tall stand included.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFor full usage instructions and workflow guidance, see the \u003ca rel=\"noopener\" href=\"https:\/\/aroespresso.com\/products\/orbit-pro-portastack-edition\" target=\"_blank\"\u003eOrbit PRO™ – PortaStack Edition listing\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePortaStack-compatible magnetic docking sleeve\u003c\/li\u003e\n\u003cli\u003eExtra-tall storage stand\u003c\/li\u003e\n\u003cli\u003e20x pins (0.25mm diameter, 67mm long), including two pin storage tubes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCare and Maintenance\u003c\/h2\u003e\n\u003cp\u003eBrush off loose grounds after use or wipe clean with a dry or slightly damp cloth. The sleeve may be removed for cleaning if needed. Hand wash only with mild soap and lukewarm water. Rinse thoroughly and dry completely before reassembly. \u003cstrong\u003eNot dishwasher safe.\u003c\/strong\u003e\u003c\/p\u003e","brand":"ARO Espresso","offers":[{"title":"Black \/ 58mm \/ Yes please","offer_id":54738572214563,"sku":"CFE-PORSTK-ORBKIT-58-BLK-FNL","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 58mm \/ No – I already have one","offer_id":54764270551331,"sku":"CFE-PORSTK-ORBKIT-58-BLK-NOFNL","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 54mm \/ Yes please","offer_id":54738572181795,"sku":"CFE-PORSTK-ORBKIT-54-BLK-FNL","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 54mm \/ No – I already have one","offer_id":54764270518563,"sku":"CFE-PORSTK-ORBKIT-54-BLK-NOFNL","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ 58mm \/ Yes please","offer_id":54738572280099,"sku":"CFE-PORSTK-ORBKIT-58-SLV-FNL","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ 58mm \/ No – I already have one","offer_id":54764270616867,"sku":"CFE-PORSTK-ORBKIT-58-SLV-NOFNL","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ 54mm \/ Yes please","offer_id":54738572247331,"sku":"CFE-PORSTK-ORBKIT-54-SLV-FNL","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ 54mm \/ No – I already have one","offer_id":54764270584099,"sku":"CFE-PORSTK-ORBKIT-54-SLV-NOFNL","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/3922\/7171\/files\/AROPortaStack_OrbitPROUpgradeKit_CoverPhoto_StandardOrbittoPortaStackOrbit.jpg?v=1771551213"}],"url":"https:\/\/aroespresso.com\/collections\/portastack-compatible-tools.oembed","provider":"ARO Espresso","version":"1.0","type":"link"}